So, you want to do some floor sanding, right? Not a problem. There are many great ways to get your floor looking great without sanding the whole thing. However, if you want to avoid making a mess on your floor, there are some great tips to help you out. Read on to find out how to do proper floor sanding. Let’s get started!
The First Mistake – They Think That Floor Sanding is Easy! Well, it isn’t unless you know what you’re doing! They believe that they used a little bit of sandpaper on a badly stained piece of wood at the local home-stomping centre, and they know all about how to sand a floor. Nonsense! Anyone can sand a floor, but not everyone has good technique.
You will need a good quality power tool for hardwood floor sanding Adelaide. A diamond-tipped sander is great for this. This type of sander cuts through the floor and takes out the flaws. When using a diamond-tipped sander, always wear ear protection, eye protection, safety glasses, a dust mask, and a face shield. This is especially important if you have children around the home, as you don’t want to sand their heads accidentally.
Other common mistakes include trying to use an electric sander. This can lead to tears and chips, which aren’t good. You may also damage the wood if you’re trying to smooth edges. Electric powered floor sanding machines can be hard to use, and if you use them for this type of job, make sure you have some extra power, or you could run the risk of overloading your electric unit. Instead, make sure you use a cordless wood-sanding machine that has continuous cord support. These are usually easier to use, plus they will save you money on the electric bill.
Another floor sanding Adelaide mistake people often make using cheap, disposable floor belts. These belts, like the electric ones, can be hard to work with. Plus, belts can lose their grip, leaving you struggling to get a smooth edge. Instead, opt for belt sanders, which are made to make your life easier.
A belt-sander has several different speeds and settings, so you can choose the best speed that produces the smoothest finish. There are even belt sanders that have serrated edges for more accuracy. And unlike a drum sander, belt-sanders can come in a backup version so that you can use one when the main sander breaks down. They’re also small and light enough that you might not have to carry them around if you don’t plan to use them longer.
Another mistake people make is sticking with worn belts. Worn belts leave floors looking unfinished. Instead, opt for heavy-duty electric or cordless sanding belts. Heavy-duty belts are also great for tough but durable jobs, like floor restoration. And because they cost more than flat belts, you’ll have more money for other projects.
Finally, you need to make sure you use the right grit (the amount of grit that secures the surface of your floor) when dusting your wooden floors. When dusting with a power sander, use a lower setting on your grit to avoid embedding dust in the wood. However, when dusting with a fine-grit pad, use a higher setting. The higher the grit, the finer the dust particles will be. Plus, if you accidentally hit a nail on the floor with a sander, you can easily remove it without embedding dust in the wood by using fine-grit sandpaper.